Effects of Nb2O5 on thermal stability and optical properties of Er3+-doped tellurite glasses

Er³⁺-doped tellurite glasses with molar compositions of xNb₂O₅-(14.7-x)Na₂O--10ZnO--5K₂O--10GeO₂-- 60TeO₂--0.3Er₂O₃ (x=0, 3, 5, 7 and 9) have been investigated for developing 1.5~μm fibre and planar amplifiers. The effects of Nb₂O₅ on the thermal stability and optical properties of Er³⁺-doped tellurite glasses have been discussed. It is noted that the incorporation of Nb₂O₅ (x=5) increases the thermal stability of tellurite glasses significantly. Er³⁺-doped niobium tellurite glasses exhibit a large stimulated emission cross-section (7.2\times 10^-21- 10.7×10^-21~cm² and the gain bandwidth, FWHM×\sigma_e^{\rm peak} (274\times 10^-28 - 480×10^-28~cm³), which are significantly higher than that of silicate and phosphate glasses. In addition, the intensity of upconversion luminescence of the Er³⁺-doped niobium tellurite glasses decreases rapidly with increasing Nb₂O₅ content. As a result, Er³⁺-doped niobium tellurite glasses might be a potential candidate for developing laser or optical amplifier devices.     

利用微悬臂梁表面应力研究聚N-异丙基丙烯酰胺分子的构象转变

提出了一种基于微悬臂梁传感技术研究大分子折叠/构象转变的新方法.通过分子自组装的方法将热敏性的聚N-异丙基丙烯酰胺(PNIPAM)分子链修饰到微悬臂梁的单侧表面，用光杠杆技术检测温度在20—40℃之间变化时由于微悬臂梁上的PNIPAM分子在水中的构象转变所引起的微悬臂梁变形.实验结果显示：在升温过程中，微悬臂梁的表面应力发生了变化并且导致微悬臂梁产生了弯曲变形，这个过程对应着微悬臂梁上的PNIPAM分子从无规线团构象到塌缩小球构象的构象转变.在降温过程中，微悬臂梁发生了反方向的弯曲变形，这对应着PNIPA 关键词： 构象转变 聚N-异丙基丙烯酰胺分子链 表面应力 微悬臂梁     

一类不确定混沌系统的观测器同步

基于降维观测器的方法实现了一类具有外部扰动的混沌系统的同步. 无需知道系统外部扰动项的任何信息，就可对驱动系统设计基于降维观测器的响应系统，从而实现了混沌系统的同步. 数值仿真表明该方法是有效的. 关键词： 混沌同步 混沌系统 观测器     

表面传导电子发射显示器件电场分布的理论研究

利用电磁理论对表面传导电子发射显示器件的单个子像素在笛卡尔坐标系内建立合理的电学物理模型，对内部电场强度和电势进行了深入研究，推导出了模型不同部分的面电荷密度、电场强度和电势的表达式.为了形象地表征其电学特性，利用MATLAB 6.5对电场强度和电势的分布情况进行了模拟，从理论上对模拟曲面给出了合理的解释，分析了子像素内部电子的发射机理和电学行为，并与电子多重散射模型和惯性离心模型进行了对比，解释了SED阳极电流形成的重要原因.在误差允许的范围内，本模型有关电场强度分布的结论与惯性离心模型一致. 关键词： 表面传导电子发射显示 遂穿效应 面电荷密度 电场强度     

C-V法提取SiC隐埋沟道MOSFET沟道载流子浓度

本文对用C-V法提取SiC隐埋沟道MOSFET沟道载流子浓度的方法进行了理论和实验分析. pn结的存在所造成的埋沟MOS结构C-V曲线的畸变为沟道载流子浓度的提取带来一些问题. SiC/SiO₂界面上界面态的存在也会使提取出的数值与实际数值产生偏差. 本文首先从理论上分别分析了沟道深度和界面态对沟道载流子浓度提取结果的影响，然后对两种沟道深度的埋沟MOS结构C-V曲线进行了测试，提取出了沟道掺杂浓度. 在测试中，采用不同的扫描速率，分析了界面态对提取结果的影响. 理论分析结果和实验测 关键词： C-V法 SiC 隐埋沟道MOSFET 沟道载流子浓度     

Raman spectroscopic study of ceramic Sr2Bi4Ti5O18

Raman spectra of ceramic Sr2Bi4Ti5O18 （SBTi5） are reported to consist of four different Raman bands. Temperature-dependent spectra reveal the relationship between the lattice vibration and the material＇s structure. There appears a relatively large change in structure of the material at about 273K, The anharmonic potential of the material has a great influence on its phonon mode full width at half maximum （FWHM）, which can be expressed by a function of temperature. Theoretical fittings of the FWHMs for the two modes at around 312 cm^-1 and 464cm^-1 indicate that the latter phonon mode is more anharmonic than the former one.     

Study on anti-emission materials for non-emitting grid applications in microwave power tubes

Hafnium and platinum were deposited onto molybdenum grids by ion-beam assisted deposition method. Electron-emission characteristics from molybdenum grids with Hf and Pt films, which were contaminated by active electron-emission substances (Ba, BaO) of the cathode, were measured using analogous diode method. The surfaces of grids were analyzed by X-ray diffraction. The results revealed that the reaction between BaO and Hf formed BaHfO₃ compound, which greatly reduced the accumulation of BaO on the surface and accordingly decreased grid emission. In contrast, Ba were formed by the decomposition of BaO on the surface of Pt film under high temperature and re-evaporated from its surface, which reduced the active electron-emission substances on the surface of the grid and effectively restrained grid emission. Their mechanisms for grid-emission suppression are discussed and a good method to develop new grid-coating materials is suggested.     

Simulation of island aggregation influenced by substrate temperature, incidence kinetic energy and intensity in pulsed laser deposition

Using kinetic Monte Carlo method, we have simulated a pulsed energetic growth process in pulsed laser deposition. During the growth of film, substrate temperature mainly influences upon film morphology by directly enhancing the adatom mobility through the temperature-dependent thermal vibration. By contrast, the effect of incidence kinetic energy on film growth is complex resulting from the collisions between the incident particles and the adatoms. The results show that improving incident kinetic energy cannot significantly accelerate the migration rate of adatom but change surface microstructure and promote single adatom formation resulting in more island aggregation density. Moreover, since pulse-influx characterizes pulsed laser deposition, the intensity per pulse contributes to the evolvement of nucleation density and the results illustrate that a general scaling law different from ordinary power law still exists in energetic growth of pulsed laser deposition.     

折射率连续周期分布一维光子晶体的带隙分析

微分传输矩阵法(DTMM)可以解析求解一维非均匀介质中的波动方程。用该方法,对几种折射率连续且周期分布的一维光子晶体进行了带隙分析。结果表明,折射率连续变化的一维周期结构也具有明显的带隙特征,折射率变化越平缓,光带隙的宽度越小。对于折射率正弦变化的一维光子晶体,其折射率变化得越剧烈,光子晶体的中心频率越小,带隙越宽;同时,折射率的平均值越大,中心频率越小,带隙越窄。由于材料的物理特性都是连续变化的,同样可以把结构推广到一维周期性功能梯度材料。     

Flat-top interleavers with chromatic dispersion compensator based on phase dispersive free space Mach-Zehnder interferometer

In this paper, novel interleavers using circular cavities (CC) in a Mach-Zehnder interferometer (MZI) has been presented and demonstrated for the first time, in which CCs act as phase dispersive mirrors which exhibit a periodic dependence on the frequency of light. Three implementation schemes have been proposed and investigated. Theoretical analysis shows the spectral characteristics of each scheme in a 50-GHz channel spacing application. Furthermore, the chromatic dispersion (CD) of each output comb can be flattened within passband by appending an additional CC. The result shows that the proposed designs with novel interferometer technique can simultaneously provide flat top passbands, high isolation stopband and low CD value as well.